Protecting workers against contaminants in workplace environment is essential. To ensure workers wear their respirator is not always easy. 3M 8822 particulate respirator's lightweight construction is designed to help with wearer compliance.

- Protection factor: 10 x Workplace Exposure Standard

Proper selection, training and use are essential in order for the respirator to adequately protect the wearer from certain airborne contaminants.

Warning: Selection of the most appropriate Respiratory Protective Equipment (RPE) will depend on the particular situation and should be made only by a competent person knowledgeable of the actual working conditions and the limitations of RPE. Details regarding performance and limitations are set out on the respirator packaging and user instructions. Before using any respirator, the wearer must read and understand the user instructions for the product. Use in accordance with AS/NZS 1715:2009 Standard. Misuse can result in sickness or death. For more information, see your Supervisor or contact an Occupational Hygienist, Safety professional or 3M TechAssist Helpline - Australia 1800 024 464 / New Zealand 0800 364 357.

- Proprietary 3M Cool Flow exhalation valve helps to remove your hot exhaled air for a cooler and drier wear and encourages wearer compliance

- Lightweight construction for added comfort that may increase wearer time

- Mould nose clip to the wearer's nose shape to help reduce eyewear fogging and for a better seal and fit

- Coloured straps for easy identification of protection class (blue for P2)

- Made from 3M Advanced Electret Filter Material for effective filtration with low breathing resistance

- Does not contain components made from natural rubber latex

- P2 rated filtration efficiency

- Protects against hazards, such as, dusts, mists, smoke and fume

- Complies with AS/NZS 1716:2012

The 9542V is a valved, disposable specialty respirator with a folded design for easy storage and dispensing in the workplace. Each respirator is individually wrapped, protecting it from contamination prior to use. The 9542V respirator is compatible with other 3M personal safety products, e.g. eyewear and earplugs.

- Protection factor: 10 x Workplace Exposure Standard

- The 3M Cool Flow valve effectively removes heat build-up and provides a cooler and more comfortable wear. The 3M Cool Flow valve also minimises the risk of fogging up eyewear

- Activated carbon layer reduces exposure to nuisance levels* of organic vapour and odour, e.g. diesel particulate matter and unburned fuel vapour

- Folded design for easy storage and dispensing in the workplace

- Individually wrapped for protection from contamination prior to use

- Does not contain components made from natural rubber latex

- P2 rated filtration efficiency

- Protects against hazards, such as, dusts, mists and fumes

- Complies with AS/NZS 1716:2012

The 3M Qualitative Fit Test Kit FT-30 Bitter is designed for fit-testing any negative pressure respirator e.g. 3M Disposable and Reusable Half Face Respirators. The 3M Qualitative Fit Test Apparatus Kit contains: a laminated instruction booklet, sensitivity solution, fit test solution, two nebulisers, one hood, one collar assembly and two sets of replacement nebuliser inserts.

Test kits and accessories designed to help your organisation meet AS/NZS 1715:2009 mandatory fit testing of respirators for compliance. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter. 3M offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a very bitter taste. The choice between the bitter and sweet fit test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used.

• FT-30 uses a test solution of denatonium benzoate to produce a very bitter taste
• Replacement parts are available
• Spare parts are: Sensitivity Solution FT-11 Sweet & FT-31 Bitter, Fit Test Solution FT- 12 Sweet & FT- 32, Fit Test Nebulizer FT-13, Fit Test Hood FT-14
• For Occupational Use Only

The 3M Fit Test Solution FT-32 Bitter is used to test the respirator wearer to a bitter solution. It is used with the 3M Qualitative Fit Test Apparatus Kit FT-30 Bitter.

Test kits and accessories designed to help your organisation meet AS/NZS 1715:2009 mandatory fit testing of respirators for compliance. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter. 3M offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a very bitter taste. The choice between the bitter and sweet fit test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used.

• A replacement part for 3M Qualitative Fit Test Apparatus Kit FT-30 Bitter
• Used to fit test 3M Disposable and Reusable Half Face respirators
• Packaging: 55 ML per bottle. 1 per pack. 
• 6 packs per case
• For Occupational Use Only

Convenient respiratory kit designed for asbestos removal and environments containing dust. The kit comes complete with the 3M Full Face 6000 Series Respirator which is light weight and easy to use. It also includes two pairs of 3M Particulate Filters 6035 P2/P3. The unique solid top particulate filter casing design reduces premature caking and clogging from dirt, grime, water or dust. The protective casing also aids decontamination practices. Kit Contains: 

1 x 3M Full Face Respirator 6000 Series 

2 x pair of 3M Particulate Filters 6035 P2/P3 

4 x 3M Respirator Cleaning Wipes 504 

1 x 3M No-Touch Foam Earplugs P2000, Class 4 (SLC80: 25dB) 

1 x 3M Respiratory Protection Guide 

1 x Handy Storage Container Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator.

Common Applications/Hazards:
- Suitable for certain asbestos work requiring higher protection levels: Refer to local asbestos government guidelines (Safework Australia or Worksafe NZ)
- Also for lead paint removal, sanding, sawing, drilling, cutting, grinding, masonry, insulation and hazardous particulates such as silica & beryllium.
- Environments requiring face and eye protection
Protection Factors
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant IDLH levels.

This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
- With a 3M 6000 Full Face Respirator: 100 times the Workplace Exposure Standard (WES) or 30 ppm, whichever is the lower

- Kit also contains 3M Respirator Cleaning Wipes, 3M Earplugs and a handy storage container

- To avoid moisture and contaminant exposure, store the respirator in the handy, sealable storage container

- P3 Particulate Protection

- Bayonet-style connection fits a broad range of filters

A convenient respiratory kit designed for certain painting and spraying environments.The kit comes complete with the 3M Full Face Reusable 6000 Series Respirator for comfort and durability. The respirator is simple and easy to use, well balanced and provides a wide field of vision.Kit contains: 1 x 3M Full Face Respirator 6000 Series (available S, M & L sizes) 1 x pair of 3M Organic Vapour Filters 6051 A1 1 x box (5 pairs) of 3M Particulate Filters 5925, P2 1 x pair of 3M Filter Retainers, 501 1 x 3M No-Touch Foam Earplugs P2000, Class 4 (SLC80: 25dB) 1 x 3M Respiratory Protection Guide* Not to be used when spraying isocyanate based paints

The 3M 'Maintenance Free' Half Face Respirator 3M4251 is a ready-to-use, Half Face Respirator designed for effective and comfortable protection against organic vapour and particulate hazards found throughout industry (A1P2).

3M4251 is a simple and ready-to-use Respirator with an integrated cartridge and filters, offering low breathing resistance.

Includes a resealable bag for hygienic storage and transportation.

• Lightweight, low profile and well balanced design.
• Textured face seal minimises slippage and improves comfort.
• Use until damaged, particulate filters clog or gas filters become saturated.
• Ideal for contractors, plant shutdowns and spill response.
• Eliminates the need for a separate respirator, cartridge/filter or carrying out respirator maintenance.
• Re-sealable bag provides convenient and clean storage between uses.