NOTICE TO OUR VALUED CUSTOMERS:
Due to the Coronavirus pandemic; we have temporarily placed our online store into "Quote Mode" so that we can fairly manage the distribution of stock to our customers.
For our account customers; please place orders online as per usual and we will convert your quote orders internally.
Any other queries can be emailed to us at info@uneedit.com.au
Thank you for your patience and understanding during theses unprecedented trying times.
The X-Series earmuffs are 3M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. This lightweight, lower-profile earmuff helps with compatibility with other personal protective equipment and is designed for protection against moderate-to-high level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric".
3M PELTOR X-Series Earmuffs deliver comfort, design, and protection in one groundbreaking earmuff line. Additionally, these earmuffs have earcup pivot points that tilt for optimum comfort and efficiency, as well as replaceable ear cushions and foam liners to help ensure proper equipment hygiene.
3M Micropore Tape Refill
3M Safety Glasses, Solus Grey
Lightweight with soft cushioning on nose bridge and padding on temples for increased comfort and stability when worn.
3M Safety Glasses, Solus Clear
Lightweight with soft cushioning on nose bridge and padding on temples for increased comfort and stability when worn.
The 3M Sensitivity Solution FT-31 is used to test the sensitivity of the respirator wearer to a bitter solution. It is used with the 3M Qualitative Fit Test Apparatus Kit FT-30 Bitter.
Test kits and accessories designed to help your organisation meet AS/NZS 1715:2009 mandatory fit testing of respirators for compliance. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter. 3M offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a very bitter taste. The choice between the bitter and sweet test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used.
The 3M Fit Test Solution FT-32 Bitter is used to test the respirator wearer to a bitter solution. It is used with the 3M Qualitative Fit Test Apparatus Kit FT-30 Bitter.
Test kits and accessories designed to help your organisation meet AS/NZS 1715:2009 mandatory fit testing of respirators for compliance. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter. 3M offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a very bitter taste. The choice between the bitter and sweet fit test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used.
Protecting workers against contaminants in workplace environment is essential. To ensure workers wear their respirator is not always easy. 3M 8822 particulate respirator's lightweight construction is designed to help with wearer compliance.
- Protection factor: 10 x Workplace Exposure Standard
Proper selection, training and use are essential in order for the respirator to adequately protect the wearer from certain airborne contaminants.
Warning: Selection of the most appropriate Respiratory Protective Equipment (RPE) will depend on the particular situation and should be made only by a competent person knowledgeable of the actual working conditions and the limitations of RPE. Details regarding performance and limitations are set out on the respirator packaging and user instructions. Before using any respirator, the wearer must read and understand the user instructions for the product. Use in accordance with AS/NZS 1715:2009 Standard. Misuse can result in sickness or death. For more information, see your Supervisor or contact an Occupational Hygienist, Safety professional or 3M TechAssist Helpline - Australia 1800 024 464 / New Zealand 0800 364 357.
- Proprietary 3M Cool Flow exhalation valve helps to remove your hot exhaled air for a cooler and drier wear and encourages wearer compliance
- Lightweight construction for added comfort that may increase wearer time
- Mould nose clip to the wearer's nose shape to help reduce eyewear fogging and for a better seal and fit
- Coloured straps for easy identification of protection class (blue for P2)
- Made from 3M Advanced Electret Filter Material for effective filtration with low breathing resistance
- Does not contain components made from natural rubber latex
- P2 rated filtration efficiency
- Protects against hazards, such as, dusts, mists, smoke and fume
- Complies with AS/NZS 1716:2012
3M Safety Glasses 400, Securefit Grey
3M Safety Glasses 400, Securefit Mirror
The 3M Fit Test Hood FT-14 is used with 3M Qualitative Fit Test Apparatus Kit FT-10 Sweet and FT-30 Bitter as the test environment.
Test kits and accessories designed to help your organisation meet AS/NZS 1715:2009 mandatory fit testing of respirators for compliance. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter. 3M offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a very bitter taste. The choice between the bitter and sweet test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used.
The 3M Qualitative Fit Test Kit FT-30 Bitter is designed for fit-testing any negative pressure respirator e.g. 3M Disposable and Reusable Half Face Respirators. The 3M Qualitative Fit Test Apparatus Kit contains: a laminated instruction booklet, sensitivity solution, fit test solution, two nebulisers, one hood, one collar assembly and two sets of replacement nebuliser inserts.
Test kits and accessories designed to help your organisation meet AS/NZS 1715:2009 mandatory fit testing of respirators for compliance. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapour respirator with a particulate pre-filter. 3M offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a very bitter taste. The choice between the bitter and sweet fit test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used.
The 9542V is a valved, disposable specialty respirator with a folded design for easy storage and dispensing in the workplace. Each respirator is individually wrapped, protecting it from contamination prior to use. The 9542V respirator is compatible with other 3M personal safety products, e.g. eyewear and earplugs.
- Protection factor: 10 x Workplace Exposure Standard
- The 3M Cool Flow valve effectively removes heat build-up and provides a cooler and more comfortable wear. The 3M Cool Flow valve also minimises the risk of fogging up eyewear
- Activated carbon layer reduces exposure to nuisance levels* of organic vapour and odour, e.g. diesel particulate matter and unburned fuel vapour
- Folded design for easy storage and dispensing in the workplace
- Individually wrapped for protection from contamination prior to use
- Does not contain components made from natural rubber latex
- P2 rated filtration efficiency
- Protects against hazards, such as, dusts, mists and fumes
- Complies with AS/NZS 1716:2012
FX Earplugs feature a bell shape and super-soft, slow-recovery foam to effectively seal the ear canal and provide reliable hearing protection. Flared end helps make fitting and removal easier.
Features include:
Corded, to assist loss and ease of use.
Soft, pliable foam offers comfort for wearing over an extended time.
Slow recovery foam effectively seals the ear canal and helps provide reliable hearing protection.
Bell shape allows easy fitting and removal.
EARfit Testable.
Skull Screw Earplugs perform as tough as they look by providing excellent protection for noisy environments. The metallic colour makes the Earplugs look solid, but they are made from ultra-soft foam that provides day long comfort.
Grab the attention of your young workers with these radically designed, push-to-fit Earplugs and help boost hearing protection and compliance at the same time.
Features include:
Corded, to assist loss and ease of use.
Metallic look appeals to young workers & drives compliance.
Screw grip & twist to seal design ensures maximum protection.
Perfect for wearers with dirty hands.
Stem aids insertion.
Skull Screw Earplugs perform as tough as they look by providing excellent protection for noisy environments. The metallic colour makes the Earplugs look solid, but they are made from ultra-soft foam that provides day long comfort.
Grab the attention of your young workers with these radically designed, push-to-fit Earplugs and help boost hearing protection and compliance at the same time.
Features include:
Metallic look appeals to young workers & drives compliance.
Screw grip & twist to seal design ensures maximum protection.
Perfect for wearers with dirty hands.
Stem aids insertion.